2021 6th China Metalworking Fluid Technology Development Summit
Manufacturing industry is the main body of a country’s national economy. It is the foundation of a nation, the tool for rejuvenating a country and the base of a powerful nation. Industrial civilization started in the middle of 18th century. Since then the world history and Chinese history have proved again and again that the prosperity of a nation lies in the power of manufacturing industry.
Metalworking fluids are widely used in manufacturing. They are the media that must be used as lubricant, coolant and flush fluid during the metalworking. Compared with the world’s advanced level, Chinese products are high- pollution. There are the high proportion of oil-based cutting fluid emissions ,which is up about 80%. With the increasingly environmental pollution, many places have launched environmental protection. So, oil-based cutting fluids have been restrictedly used step by step.
Meanwhile, the “Made in China 2025“ is introduced to strengthen the high-end manufacturing, Metalworking fluids industry in high-end manufacturing is not only to uphold the development, but also will carry the building green manufacturing system on shoulders and take the development of ecological civilization .
In summary, metalworking fluids technology’s progress is closely related to national strategy. Cutting fluid which is environment-friendly is the development direction of cutting fluid. Additionally ,it is an important support to build a green manufacturing system, and comes “Made in China 2025” strategic planning into reality. Therefore , we invite you to attend 2016 metalworking fluids technology development forum, sharing the advanced metalworking fluid technology.
If you have any questions, please contact：Miss Gu
Tel:021-62951395
Fax:021-62780038
Email:guyuan@shanghai-intex.com
2020 5th China Metalworking Fluids Technology Development Summit
【Time】Oct. 22, 2020
【Venue】Tongli Lake Resort Phase II
| 2020 China Metalworking Fluid Technology Development Summit Forum | ||||
|---|---|---|---|---|
| Time | Topic | Unit | Reporter | Position |
| 9:00-9:25 | Introduction of new generation high-performance biologically stable non-soap-based aluminum hot rolling fluid technology | Quaker Houghton | Chen Huan | Non-ferrous rolling technology research and development supervisor |
| 9:25-9:50 | Application of a new generation of three-dimensional siloxane in metalworking fluids | Meng Qingxin Additive Trading (Shanghai) Co., Ltd. | Du Jin | China Key Account Manager |
| 9:50-10:15 | Preparation of anti-miscellaneous fully synthetic aluminum alloy microporous tapping fluid and comparison of lubricating performance with some competing fully synthetic and emulsified oils | Shanghai Chengde Trading Co., Ltd. | Li Changqun | Technical Manager |
| 10:15-10:45 | Visit & Coffee Break | |||
| 10:45-11:10 | Evaluation and application of low-foam emulsifier and trans polyether in metalworking fluids | Levima New Material Technology Co., Ltd. | You Longgang | R&D manager |
| 11:15-11:40 | Low-odor fully synthetic liquid solution | Sasol (China) Chemical Co., Ltd. | Li Jiusheng | Technical Support Engineer |
| 11:40-12:05 | Application of water-soluble polyethers with different structures in fully synthetic metalworking fluids | Clariant Chemical (China) Co., Ltd. | Hao Jinhui | Technical manager |
| 12:05-13:30 | lunch | |||
| 13:30-13:55 | Health and safety in the use of metalworking fluids | Flowserve Lubricants (China) Co., Ltd. | Zeng Yongjun | Metalworking fluid product manager |
| 13:55-14:20 | Minimal lubrication and supporting oil for clean cutting | Sinopec Lubricant Co., Ltd. Shanghai Research Institute | Li Jin | researcher |
| 14:20-14:45 | Research and development of integrated circuit wafer and chip manufacturing processing fluid | Shanghai Advanced Institute of Chinese Academy of Sciences | Zeng Xiangqiong | researcher |
| 14:45-15:05 | Visit & Coffee Break | |||
| 15:05-15:30 | The relationship between molecular structure and performance of various water-based lubricants | Hangzhou Umi Chemical Co., Ltd. | Zou Yunhui | General Manager and Chief Researcher |
| 15:30-16:20 | The development status and planning of domestic neodecanoic acid and its application in the water-based cutting fluid industry | Foshan Jinjia New Material Technology Co., Ltd. | Zeng Chuanqi | General manager |
| 16:20-16:45 | Selection and Application of Lubricating Ester in Rolling Oil | Senior industry experts | Chen Chunhuai | |
2018 3rd China Metalworking Fluids Technology Development Summit
【Time】June.20-21,2018
【Venue】Renaissance Shanghai Yangtze Hotel
Conference Issues
| Time | Subject | Speaker | Company | Company Position |
|---|---|---|---|---|
| 6.20( 9: 00 - 9: 30 ) | Discussion on lubrication requirements of aluminum processing for automobiles | Lin Lin | Chinalco Group | Chief Engineer of Aluminum Processing |
| 6.20( 9: 30 - 10: 00 ) | Demand for metal materials for lightweight automobiles | Park myung | Soo ( south Korea ) Shanghai shuaifeng industrial co., ltd. ( formerly posco steel group, south Korea ) | Technical Director |
| 6.20( 10: 30 - 11: 00 ) | Application of metalworking fluid in automobile parts manufacturing industry | Li Jin | Shanghai research institute / Sinopec lubricating oil co., ltd. | Researcher |
| 6.20( 11: 00 - 11: 30 ) | Overview of lubrication technology for new generation colored hot rolling | Wang xi | Hao Fulton ( Shanghai ) senior industrial media co., ltd. | Technical Manager |
| 6.20( 11: 30 - 12: 00 ) | Influence of metal working fluid type on tool wear and machining quality | Chen Lili | Kuike Chemistry ( China ) co., ltd. | Researcher |
| 6.20( 13: 30 - 14: 00 ) | Oxidation and aging of metal working fluids | Chen chunhuai | Senior Experts in the industry | |
| 6.20( 14: 00 - 14: 30 ) | Study on corrosion inhibition performance of aluminum phosphate ester with different structures | Hao Jinhui | Solvi Investment co., ltd. | Technical Service Manager |
| 6.20( 14: 30 - 15: 00 ) | Corrosion: problems and control | Chen Yundong | Association of Friction Scholars and Lubrication Engineers ( xinmei branch industrial products ( Shanghai ) co., ltd. ) | Technical Director of Asia Pacific Region |
| 6.20( 16: 00 - 16: 30 ) | Synthesis of sodium sulfonate by sur fonic sm: a low-foaming emulsifier for water-soluble metalworking fluids | Annabel rubio | Huntsman Chemical Trade ( Shanghai ) co., ltd. | Senior Scientist |
| 6.20( 16: 30 - 17: 00 ) | Solution of low bubble surface activity and apeo substitute products | Dr. Li lei | Jiangsu Lianhong Technology co., ltd. | Deputy General Manager |
| 6.21( 9: 00 - 9: 30 ) | Challenges of 3c industry changes to metalworking fluids | Li Maosheng | Guangzhou Fang Chuan Lubrication Technology co., ltd. | Technical Director |
| 6.21( 9: 30 - 10: 00 ) | Application of metal working fluid in 3c industry | Xianghui | Research Institute of Lubrication, Guangzhou institute of mechanical science | Director |
| 6.21( 10: 00 - 10: 30 ) | Design ideas and monitoring points of processing fluid suitable for 3c products | Xu dongjie | Shanghai Yisa Chemical Technology co., ltd. | General Manager |
| 6.21( 11: 00 - 11: 30 ) | Grinding and treatment of grinding burns | Wu ronghua | Lifu Chemical ( Shanghai ) co., ltd. | General Manager |
| 6.21( 11: 30 - 12: 00 ) | High efficiency application of high pressure cooling in machining | Ceng Yongjun | German Fox Group - Fox China | Metalworking Fluid Product Manager |
| 6.21( 13:30-14:00 ) | Semi-synthetic formula system with durable low foam | Zhao zezhu | Shanghai Hongze Chemical co., ltd. | Technical Service Engineer |
| 6.21( 14:00-14:30 ) | Study on performance and application of an improved polyether copper-aluminum corrosion inhibitor containing no silicon and phosphorus elements | Cheng Qinghua | Nortel Biotech ( Hefei ) co., ltd. | Chief Engineer |
| 6.21( 15:00-15:30 ) | Corrosion inhibitor - gelbert acid | Chen fangbo | Sasso ( China ) Chemical co., ltd. | Senior Technical Support Engineer |
| 6.21(15: 30 - 16: 00 ) | Screening of antifoaming agent in water-based cutting flui | Wang Qiang | Tianjing Haoruisen Chemical Trade co., ltd. | Manager |
2016-2017 China Metalworking Fluids Technology Development Summit Review
2017 2nd China Metalworking Fluids Technology Development Summit
【Time】May.10-11,2017
【Venue】Renaissance Shanghai Yangtze Hotel
Shanghai Lubricant Trade Association Metalworking Fluids Committee
Shanghai Intex Exhibition Co.,Ltd
Shanghai BAOSTEEL Industry Technology Service Co.,Ltd
May.10,2017 MWF Conference Agenda
| Time | Topic | Company | Speaker | Title |
|---|---|---|---|---|
| 9:00-9:40 | Metalworking Corrosion Issues and Test Methods | STLE | Jerry.P.Byers | CMFS® Expert |
| 9:40-10:20 | Effect of Metalworking Fluids on Tool Life | FUCHS Lubricants China | Jian Yuan | MWF R&D Project Manager |
| 10:20-10:40 | Tea Break | |||
| 10:40-11:20 | New Polymeric Emulsifier Technology and Application | Afton | Colin Liu | MWF CTS Supervisor |
| 11:20-12:00 | Test Method for Rust Prevention of Water Base Materials: an Interpretation of the Standard of Cast Iron Scraps | The Rust Prevention Committee of China Surface Engineering Association | Zhengqian Wu | Secretary General/Senior Engineer |
| 12:00-12:40 | New Developments in Ashless Rust Preventive Technologies | Lubrizol | Tao Zhu | Technology Manager |
| 12:40-14:00 | Lunch | |||
| 14:00-14:40 | Specialty Amines’ Application in Metal Working Fluids | ANGUS Chemical Company | Rachel Zeng | Customer Application Specialist |
| 14:40-15:20 | New Generation of Phosphate-esters for MWF | Solvay China | Jinhui Hao | Technical Service |
| 15:20-15:40 | Tea Break | |||
| 15:40-16:20 | Low Foam Emulsifier Application in Metal Working Fluid | Dow Chemical (China) Investment Co., Ltd | Lixin You | Technical Engineer |
| 16:20-17:00 | Study on the Properties of a New Polymeric Ester | Neuftech（Hefei）Bio-Technology Co.,Ltd. | Qinghua Cheng | General Engineer |
| 17:00-17:40 | The Trends of Microbial Control Technology for Metalworking Fluids | Schülke & Mayr GmbH | Donie Zhang | Business Development Manager |
May.11,2017 MWF Conference Agenda
| Time | Topic | Company | Speaker | Title |
|---|---|---|---|---|
| 9:00-9:40 | Test Method and Technical Requirements of Whole Vehicle Corrosion Test | SAIC MOTOR Technical Center | Kui Han | Test&Validation Department Body and Exterior&Interior Test Manager |
| 9:40-10:20 | Bio-diversity Analysis and Key Strain Identification in MWF | Quaker Chemical (China) Co., Ltd. | Zengtai Chen | Product Development Manager |
| 10:20-10:40 | Tea Break | |||
| 10:40-11:20 | Gas to Liquids—Leading Edge Innovation for Metal Working Oils | Shell | Liping Wang | Senior Lubes Technical Adviser PO NEA |
| 11:20-12:00 | Road Leads to High Performance Fully Synthetic Metalworking Fluid | Shanghai Starry Chemical Co.,Ltd. | Alan Zhao | Technical Service Engineer |
| 12:00-12:40 | Study on Friction and Wear Behavior and Mechanism of Titianium Alloys under Lubrication of Self-emulsifying Ester (SEE) | Tianjing Reasearch Institute for Advanced Equipment,Tsinghua University | Yuanjing Dai | Executive Deputy Director |
| 12:40-14:00 | Lunch | |||
| 14:00-14:40 | Development of Nonferrous Metal Processing Equipment, Technology and Products | China Nonferrous Metals Industry Association | Defeng Li | Deputy Director |
| 14:40-15:20 | Application Technology and Market Analysis of Large Straight Steel Pipe in Heavy Steel Pipe Structure | Shanghai Steel Tube Association | Yongxi Sun | Expert Committee Director |
| 15:20-15:40 | Tea Break | |||
| 15:40-16:20 | Application and Maintenance Technology of Stainless Steel cold rolling mill | Shanghai Research Institute of Sinopec Lubricating Oil Co., Ltd. | Jingyu Wang | Senior Engineer Ph.D |
| 16:20-17:00 | Development of Metallurgical Steel Industry and Application of Advanced Materials | Shanghai Shipbuilding Technology Research Institute | Jiaben Chen | Researcher |
| 17:00-17:40 | New Thinking on the Lubrication of Metal Processing Technology under the New Norma | University of Science and Technology Beijing | Jianlin Sun | Vice Dean Professor and Ph.D Tutor |
2016 China Metalworking Fluids Technology Development Summit
【Time】June 23,2016
【Venue】Renaissance Shanghai Yangtze Hotel
Shanghai Lubricant Trade Association Metalworking Fluids Committee
Shanghai Intex Exhibition Co.,Ltd
Shanghai BAOSTEEL Industry Technology Service Co.,Ltd
2016 MWF Conference Agenda
| Time | Topic | Company | Speaker | Title |
|---|---|---|---|---|
| 9:00-9:25 | Challenges in the Development of Environmentally Friendly Metalworking Fluids | STLE | Neil Canter | Member of STLE Board of Directors |
| 9:25-9:50 | Green Approaches on Metal Working Fluids | Houghton (Shanghai) Specialty Industrial Fluids Co. Ltd. | Max Chen | General Manager |
| 9:50-10:15 | Current Industry Trends towards More Environmentally Benign Water Miscible Cutting Lubricants | German FUCHS Group – FUCHS China | Alexander Vorushilov | R&D Manager |
| 10:15-10:30 | Tea Break | |||
| 10:30-10:55 | The Solution between Application and Formulation Design for MWF Neat Oil | Afton Chemical (Suzhou) Co.,Ltd. | Colin Liu | MWF金属加工液技术主管 |
| 10:55-11:20 | Water Based Anti Rust Agent and its Development | The Rust Prevention Committee of China Surface Engineering Association | Yongxiu Luo | Professor |
| 11:20-11:55 | Steel Rolling Process and Applied Chemicals | Shanghai Baosteel Industry Technological Service Co.,Ltd. | Yunjing Li | Technical Manager |
| 12:10-13:30 | Lunch | |||
| 13:30-13:55 | Brief Review on Technology Development of Steel Cold Rolling Oil | Quaker Chemical (China) Co. Ltd. | Xingang Zhang | R&D Manager |
| 13:55-14:20 | Metal working Trends and Technology Innovation | Lubrizol Co. Ltd. | Tao Zhu | Technical Manager |
| 14:20-14:55 | The Application of Sulfurized EP Additive in Water Soluble Metalworking Fluid | Shanghai Starry Chemical Co., Ltd. | George Liu | General Manager |
| 14:55-15:20 | Tea Break | |||
| 15:20-15:45 | PAGs Products as Performance Booster in Metal Working Fluids | DOW Chemical (China) Co. Ltd. | Lixin You | Chemist |
| 15:45-16:10 | Patent Application and Analysis Layout of Metal Working Fluids | Shanghai Micro - spectrum Chemical Technology Services Ltd. | Zhi Yongwu | Manager of the Consulting Services |
| 16:10-16:35 | Metal Working Oil and Surfactant | Sanyo Chemical Industries, Ltd. | Yoshitaka Katsukawa | Research & Application Division Functional Chemicals Research Dept.Unit Chief |